Harmsco WaterBetter 600 GPM Up-Flow Filter | WB-5X170FL  

Harmsco WaterBetter 600 GPM Up-Flow Filter | WB-5X170FL

Be the first to review this product

Harmsco WaterBetter 600 GPM Up-Flow Filter

Availability: In stock

Regular Price: $1,562,498.00
Call for Price: 1-800-608-8792

Details

harmscologo.jpg

5x170FL WaterBetter® Filter Housing High Capacity Design

logo-harmsco-madeinusa.jpg

Lower Operation Cost:

  • High flow capability
  • Lower overall operating cost
  • Reduced waste disposal
  • Longer filter runs for fewer change-outs
  • Increased contaminant removal
  • Operator friendly

Features:

  • Patented up-flow design
  • Convenient 5 jumbo-cartridge cluster design
  • Rated for pressures to 125 PSI
  • Rated for temperatures to 140˚F (60˚C)
  • Fail safe lids with individual studs
  • Electropolished 304 stainless steel housing with CPVC standpipes
  • Minimal pressure drop with Harmsco® cartridges due to pleated design and increased filter area
  • Uses (5) of the Hurricane 170 Cartridges

Applications:

  • Commercial/Residential Drinking Water
  • Industrial Waste Water Treatment
  • Surface Water Treatment Rule (SWTR) LT2
  • Ground Water Under Direct Influence (GUDI)
  • Cooling Tower Filtration
  • Reverse Osmosis Pre-filtration
  • Desalination Pre-filtration (coated option)
  • Ground Water Remediation
  • Utility Water

Filter Specifications:

  • Electropolished 304 stainless steel
  • Inlet/Outlet - 4” flanged standard
  • Standpipes - CPVC standard
  • Pressure - Up to 125 psi (8.6 bar) max
  • O-ring housing seal - Buna-N standard, EPDM, Viton optional
  • Temperature - Up to 140˚F (60˚C)

Options:

  • 316 Stainless Steel
  • 3M Scotchkote 134 Fusion-Bonded Epoxy Coating (specifically for sea water and chemical compatibility)

wb-5x170fl-pressure-drop.jpg

Dimensions:

  • Height:  46"
  • Width:  26"
  • Diameter:  26"
  • Inlet:  5"
  • Outlet:  5"
  • Pipe Size:  4" Flange
  • Drain Size:  1-1/2" NPT
  • Floor Space:  28" x 28"
  • Service Height:  85"

Resources:

Coat Option:

3m-coating.jpg

3M™ Scotchkote 134 Fusion-Bonded Epoxy Coating is a one-part, heat curable, thermosetting epoxy coating designed for corrosion protection of metal.  The epoxy is 
applied to preheated steel as a dry powder which melts and cures to a uniform coating thickness.  This bonding process provides excellent adhesion and coverage on applications such as valves, pumps, pipe drains, hydrants and porous castings.  Scotchkote 134 coating is resistant to wastewater, corrosive soils, hydrocarbons, harsh chemicals, and sea water.  Powder properties allow easy manual or automatic application by electrostatic or air-spray equipment.

  • Suitable for elevated temperature service in presence of H2S, CO2, CH4, crude oil and brine.
  • Long-term performance history in water, sewage, and other service environments.
  • Scotchkote 134 coating has been tested and  certified to ANSI/NSF Standard 61, Drinking Water System Components.
  • Scotchkote 134 FBEC meets the requirements of AWWA Standard C213 and C550.
  • Operating temperature dry is 235°F/ 113°C

Additional Information

Availability Ships From Manufacturer
Manufacturer Harmsco
Dimensions N/A
Warranty Manufacturer's Warranty

Literature

Sorry No Literature Available

Videos

Sorry No Literature Available