Harmsco WaterBetter 50 GPM Up-Flow Filter | WB-40SC-2-COAT  

Harmsco WaterBetter 50 GPM Up-Flow Filter | WB-40SC-2-COAT

Be the first to review this product

Harmsco WaterBetter 50 GPM Up-Flow Filter

Availability: In stock

Regular Price: $1,562,498.00
Call for Price: 1-800-608-8792



Harmsco WaterBetter Single Cartridge Stainless Steel Filter Housing - Model WB-40SC-2-COAT

With 3M Scotchkote 134 Fusion-Bonded Epoxy Coating

Harmsco® WB WaterBetter® single-cartridge filters deliver high flow, extended filter life, increased dirt holding capacity and ease of operation.


  • Patented Up-flow design
  • NSF Certified (All 2" Models)
  • CPVC standpipe (standard) - stainless steel optional
  • Reduced installation cost
  • Simple alternative to complex multiple cartridge housings
  • Electropolished 304 stainless steel housing
  • Fail Safe closure system
  • Extensive choice of cartridge micron ratings and media, including carbon block


  • Commercial/Residential Drinking Water
  • Industrial Waste Water Treatment
  • Surface Water Treatment Rule (SWTR) LT2
  • P.O.E. for household
  • Ground Water Under Direct Influence (GUDI)
  • Cooling Tower Filtration
  • Reverse Osmosis Pre-filtration
  • Desalination Pre-filtration (coated option)
  • Ground Water Remediation
  • Utility Water

Filter Specifications:

  • Electropolished 304 stainless steel
  • Standpipe - CPVC
  • Rim gaskets - EPDM (Buna-N, Viton available)
  • Pressure - 150 psi (10 bar) max.
  • Temperature - 140˚F (60˚C) max. Up to 200˚F (93˚C) with optional stainless steel standpipe and high temperature cartridges installed
  • Wing nuts - brass
  • BSTP optional




  • A - Filter Height:  19-1/4"
  • B - Drain:  4-1/2"
  • C - Diameter:  13"
  • D - Outlet:  3-7/8"
  • E - Inlet:  4-1/4"
  • Pipe Size:  2" NPT
  • Drain Size:  1" NPT
  • Floor Space:  15" x 15"
  • Service Height:  31"


Coat Option:


3M™ Scotchkote 134 Fusion-Bonded Epoxy Coating is a one-part, heat curable, thermosetting epoxy coating designed for corrosion protection of metal.  The epoxy is 
applied to preheated steel as a dry powder which melts and cures to a uniform coating thickness.  This bonding process provides excellent adhesion and coverage on applications such as valves, pumps, pipe drains, hydrants and porous castings.  Scotchkote 134 coating is resistant to wastewater, corrosive soils, hydrocarbons, harsh chemicals, and sea water.  Powder properties allow easy manual or automatic application by electrostatic or air-spray equipment.

  • Suitable for elevated temperature service in presence of H2S, CO2, CH4, crude oil and brine.
  • Long-term performance history in water, sewage, and other service environments.
  • Scotchkote 134 coating has been tested and  certified to ANSI/NSF Standard 61, Drinking Water System Components.
  • Scotchkote 134 FBEC meets the requirements of AWWA Standard C213 and C550.
  • Operating temperature dry is 235°F/ 113°C

Additional Information

Availability Ships From Manufacturer
Manufacturer Harmsco
Dimensions No
Warranty Manufacturer's Warranty


Sorry No Literature Available


Sorry No Literature Available