Harmsco Hurricane Swing Bolt 450 GPM Industrial Up-Flow Filter  

  • Harmsco Hurricane Swing Bolt 450 GPM Industrial Up-Flow Filter

Harmsco HUR-3X170FL Hurricane Swing Bolt 450 GPM Industrial Up-Flow Filter

Be the first to review this product

Harmsco Hurricane Swing Bolt 450 GPM Industrial Up-Flow Filter

Availability: In stock

Regular Price: $1,562,498.00
Call for Price: 1-800-608-8792

* Required Fields

Regular Price: $1,562,498.00
Call for Price: 1-800-608-8792


Harmsco Hurricane HUR 3X170 SB Housing

Harmsco® Hurricane® Swing Bolt filter housings provide unsurpassed performance. Their unique design separates dense solids prior to cartridge filtration for extended filter life, increased dirt holding capacity and reduced maintenance costs.


  • Patented Up-flow Design
  • NSF 61 listed
  • Electro-polished finish - standard
  • “Swing Bolt” closure system
  • Combination cyclone separator and cartridge filter in a single compact design
  • 304 stainless steel housing and internal components - standard
  • The industry’s largest selection of cartridge options
  • Built to ASME design standards
  • Coated option available
  • Flow rates up to 450 GPM


  • Municipal Drinking Water
  • Cooling Tower Filtration
  • Desalination Pre-filtration (coated option)
  • Surface Water Treatment Rule (SWTR) LT2
  • Industrial Waste Water Treatment
  • Reverse Osmosis Pre-filtration
  • Ground Water Remediation
  • Ground Water Under Direct Influence(GUDI)

Filter Specifications

  • Electropolished finish
  • Built to ASME design standards
  • Standpipes - stainless steel
  • Inlet/Outlet - flanged connections
  • O-ring housing seal, swing-bolt closure
  • Pressure - Up to 150 psi (10 bar) max.
  • Temperature - Up to 140˚F (60˚C)* with standard cartridges. *Up to 200°F (93˚C) with HT, and 250°F (121˚C) with HTM high temperature cartridges.


  • High Pressure Housing - 200 PSI
  • 316 Stainless Steel
  • 3M Scotchkote 134 Fusion-Bonded Epoxy Coating (specifically for sea water and chemical compatibility)




  • A - Filter Height:  64"
  • B - Width:  30"
  • C - Diameter:  20"
  • D - Inlet:  35-1/4"
  • E - Outlet:  12"
  • Pipe Size:  3" Flange
  • Drain Size:  1-1/2" NPT
  • Floor Space:  3.7 ft2
  • Service Height:  98-1/2"


 Unlike conventional designs, Hurricane’s patented cartridges are made with deep, angled pleats to direct the flow into the pleated area for increased solids removal.

Coat Option


3M™ Scotchkote 134 Fusion-Bonded Epoxy Coating is a one-part, heat curable, thermosetting epoxy coating designed for corrosion protection of metal.  The epoxy is
applied to preheated steel as a dry powder which melts and cures to a uniform coating thickness.  This bonding process provides excellent adhesion and coverage on applications such as valves, pumps, pipe drains, hydrants and porous castings.  Scotchkote 134 coating is resistant to wastewater, corrosive soils, hydrocarbons, harsh chemicals, and sea water.  Powder properties allow easy manual or automatic application by electrostatic or air-spray equipment.

  • Suitable for elevated temperature service in presence of H2S, CO2, CH4, crude oil and brine.
  • Long-term performance history in water, sewage, and other service environments.
  • Scotchkote 134 coating has been tested and  certified to ANSI/NSF Standard 61, Drinking Water System Components.
  • Scotchkote 134 FBEC meets the requirements of AWWA Standard C213 and C550.
  • Operating temperature dry is 235°F/ 113°C

Note:  The Harmsco Hurricane 3X170FL will be shipped via motor freight.

Additional Information

Availability Ships From Manufacturer
Manufacturer Harmsco
Dimensions Height 64”
Width 30”
Diameter 20”
Inlet 35-1/4”
Outlet 12
Pipe size 3” Flange
Drain Size NPT 1-1/2”
Floor Space 3.7 ft
Service Height 84"
Shipping Wt. Lbs 420
Warranty Manufacturer's Warranty